Pulpit Work Party 2!!!!!!!

Post by **Matthew** » Thu Sep 07, 2006 1:19 pm

Hey All,

We need to do another Pulpit Work party to clear up some brush below the new ramp and mow the set-up area. It should take less than a couple of hours if we can get about a 10-12 to show up and bring some power tools. Saturday is looking light West. So be there!!!! Let me know if you can make it.

Matthew

Post by **brianvh** » Thu Sep 07, 2006 1:37 pm

The setup area has been mowed, we could do some cosmetic work on the side of the hill. No lawnmowers needed. But Bill's can use some weedwacking.

The brush below launch will take alot of work: If you plan on coming to the pulpit party, or ever flying the pulpit, you should come if you possibly can.
Don't leave this to others!

bustedwing2 · Post by **bustedwing2** » Fri Sep 08, 2006 5:11 am

Probably working sat,will bring the lawn tractor if it needs mowed before the flyin.RichB

John Simon · Post by **John Simon** » Fri Sep 08, 2006 10:49 am

I have a weekwacker. It's not the 100% healthy but does work. I plan to be there Saturday with luck and or Sunday. ??

John

Post by **brianvh** » Fri Sep 08, 2006 5:25 pm

I'll be heading over to camp tonight, as is my wont. Probably won't make it until around 9:30-10.

Post by **hepcat1989** » Mon Sep 11, 2006 6:50 am

Brian, I was wondering if any 2's flew the Pulpit over the weekend? I'm just getting back from Assatague island. I will be available to do work before the Fly-in. Get me a list going. I can go to Bill's hill and see what's what. Stop by the Pulpit after that. Looks like a Bill's hill day today E@7 .
Peace, Shawn.

Post by **deveil** » Mon Sep 11, 2006 9:59 pm

hepcat1989 wrote:Brian, I was wondering if any 2's flew the Pulpit over the weekend? I'm just getting back from Assatague island. I will be available to do work before the Fly-in. Get me a list going. I can go to Bill's hill and see what's what. Stop by the Pulpit after that. Looks like a Bill's hill day today E@7 .
Peace, Shawn.

have you hit those places yet? i'll back you. chain saw, machete, wheelchair etc....?

Post by **hepcat1989** » Thu Sep 14, 2006 10:07 am

I'll cruise up to the Pulpit Friday morning with chain saw, weedwacker, hammer and nails.

Shawn.

Post by **deveil** » Thu Sep 14, 2006 12:32 pm

hepcat1989 wrote:I'll cruise up to the Pulpit Friday morning with chain saw, weedwacker, hammer and nails. Shawn.

my mouth wrote the check

so yeah.
i just went out and got my supplementary oxygen bottle filled

morning? i'll check in with you for details by end of today.

hammer, nails...? any specific needs up there?

BTW - can anyone say whether the firewood needs are going to be met? although more is always good, 'don't want to haul the stuff up if there's not a specific need...

Post by **deveil** » Thu Sep 14, 2006 2:11 pm

deveil wrote: BTW - can anyone say whether the firewood needs are going to be met? although more is always good, 'don't want to haul the stuff up if there's not a specific need...

if we're going to be up there with chainsaws...does anyone know if there are restrictions on cutting/removing deadfall wood from public lands?

Post by **hepcat1989** » Thu Sep 14, 2006 4:49 pm

Gary, If you have any 16 penny nails bring em. About the deadwood a permit is required (big surprise) I don't think it costs much. I will be up there at the Pulpit messing around at 10.
Shawn.

Post by **hepcat1989** » Thu Sep 14, 2006 4:59 pm

Gary, If you have a chainsaw and weed wacker bring them just in case. I have both and will bring them ,but they are if'y.
Any other takers? No...........
Shawn.

Post by **deveil** » Thu Sep 14, 2006 7:26 pm

hepcat1989 wrote:Gary, If you have a chainsaw and weed wacker bring them just in case. I have both and will bring them ,but they are if'y.
Any other takers? No...........
Shawn.

got the chain saw.
we can waste time tuning up you're stuff, just for grins. doubt if i'll make it before noon.

Post by **hepcat1989** » Thu Sep 14, 2006 7:31 pm

Cool,
Thanks Gary.......
Shawn.

Post by **hang_pilot** » Fri Sep 15, 2006 12:52 pm

Thanks, guys! See you tomorrow.

~Daniel

Post by **hepcat1989** » Fri Sep 15, 2006 6:42 pm

I got to the pulpit at 10 and then Gary D. showed up as well. We weedwacked the whole hill, nailed some loose wood on the ramps and cleared more high brush down and to the left of the old ramp. Gary helped me with my chainsaw, but it needs a new bar . That guy has skills! (Thanks Gary)
Peace, Shawn.

chgpa.org

Pulpit Work Party 2!!!!!!!

Pulpit Work Party 2!!!!!!!

wp

Pulpit