My motocom push-to-talk (PTT) cable stop working on my last flight and the problem exists within the PTT wire and/or button as everything works just fine with another PTT. I know that others have had similar issues. Aside from using another cable, has anyone been able to come up with a fix for problem?
Ward
PTT issues
Moderator: CHGPA BOD
-
- Posts: 358
- Joined: Thu Jan 06, 2005 11:40 pm
- Location: Cumberland, MD
Re: PTT issues
You can buy just the PTT plug-in portion of the set-up if you call MotoComm and explain your need. I've talked to them a couple times over the telephone and they've seemed very accommodating. They even gave me some specific suggestions, in terms of suggested lengths, when I mentioned I was using their stuff for hang gliding.
JR
JR
-
- Posts: 1042
- Joined: Fri Feb 25, 2005 4:17 pm
Re: PTT issues
I've had the same problem with several sets of Motocoms. I can highly recommend PTT sets made by Steve Prater, who is a member of the Tennessee Tree Toppers.Ward Odenwald wrote:My motocom push-to-talk (PTT) cable stop working on my last flight and the problem exists within the PTT wire and/or button as everything works just fine with another PTT. I know that others have had similar issues. Aside from using another cable, has anyone been able to come up with a fix for problem?
Ward
marc
Great Googly-moo!
-
- Posts: 662
- Joined: Thu Jan 06, 2005 11:13 pm
- Location: Tallahassee, FL
Re: PTT issues
Here's the link:Flying Lobster wrote:I've had the same problem with several sets of Motocoms. I can highly recommend PTT sets made by Steve Prater, who is a member of the Tennessee Tree Toppers.
http://www.pttguy.com/html/pttguy_pilot_line.html
My Motocomm PTT has also gone south. At Larry Bunner's suggestion, I just recently ordered a new system from Steve. Can't recommend it yet, but others seem quite pleased.
~Daniel
-
- Posts: 243
- Joined: Mon Jun 20, 2005 5:31 pm
Re: PTT issues
I have not had good luck with motocomms either. I went back to building my own stuff. This winter I want to revamp my setup to use modular phone cables. Cheap, robust, and can be plugged and unplugged with one hand so I can have redundant wiring built into the harness with second radio.
DaveP
DaveP
Dave P
-
- Posts: 987
- Joined: Mon Mar 16, 2009 7:51 pm
Re: PTT issues
Thanks for the suggestions. JR, I called MotoComm yesterday and they are sending another PTT cable at no charge. We'll see how long this one lasts.
Ward
Ward
-
- Posts: 243
- Joined: Mon Jun 20, 2005 5:31 pm
Re: PTT issues
Save the old motocomm parts. With some mods the PTT switch can be used with better cable to make a nice unit.
DaveP
DaveP
Dave P